LIAN-LI Lian Li LANCOOL 215 Hvid
|
LIAN-LI Lian Li LANCOOL 215 Hvid
Varenr.:
LANCOOL 215WHITE
-
Strømforsyning
0W
-
Type
Mid-tårn
-
Farve
Hvid
1.004,-
803,20 ekskl. moms
Butiklager
Ikke på lager
Fjernlager
Ikke på lager
Leveringstider v. forsendelse:
Butiklager: Lev.tid: 1-2 dage
Fjernlager: Lev.tid: 1-3 dage
✅ Varer på butiklager kan også afhentes i vores butik i Roskilde. Mere info
.
.
|
LANCOOL 215 WHITE
Features:
- OPTIMIZED THERMAL MANAGEMENT
- MESH INTAKES SPANNING THE FRONT PANEL GUARANTEE SUFFICIENT AIRFLOW IN AND OUT OF THE SYSTEM.
- INCLUDED FANS
- Pre-installed fans ensure the case runs at peak performance.
- HONEYCOMB VENTS
- The honeycomb vent design at the top, rear, and above the PSU chamber guarantee an abundant airflow is delivered to the interior components, optimizing the thermal management.
- MULTI COOLING SYSTEMS SUPPORT
- Supports a maximum of 7 fans and radiators in various sizes and configurations. You make the call!
- ULTIMATE COOLING SYSTEM SCENARIO
- With two 200MM fans mounted outside of the frame,you still have enough room to front mount a 360 AIO radiator to benefit from the ultimate cooling scenario. Don’t worry about the fan screws, they won’t interfere with the radiator.
- MOVE AIR STYLISHLY WITH ARGB EFFECTS
- Two 200MM fans are equipped with LED lights which create a dazzling effect through the mesh panel.
- ARGB SYNCHRONIZATION WITH THE MOTHERBOARD
- Pressing the LED button 3 seconds passes over the control of the LED lights to the motherboard, and press the button 3 seconds again to regain control of the lights.
- PLENTY OF SPACE FOR CABLE MANAGEMENT
- The 22MM thick space behind the motherboard ensures the cables fit in well.
- PRE-INSTALLED FAN HUB
- The included fan hub can provide extra power to 3 additional fans and 1 extra ARGB device.
- KEEP THE CABLE NICE AND NEAT
- The rubber grommets around the motherboard and the cable tie points at the back of the motherboard tray, with included Velcro straps, simplify cable management.
- STORAGE & MOTHERBOARD SUPPORT
- ROOM FOR 4 STORAGE DRIVES
- E-ATX MOTHERBOARD COMPATIBLE
- Fits motherboards with a maximum width of 280MM.
- SIMPLE DUST MANAGEMENT
- The trendy mesh design at the front panel provides filtration for dust coming from outside the chassis. Moreover, the magnetic dust filter on the top and the removable full-length dust tray at the bottom protect the internal components from dust accumulation without impeding the airflow.
Specifications:
Product Name
Model
Color
Dimensions - (D) 462mm x (W) 215mm x (H) 482mm
Motherboard - E-ATX(width: under 280mm)/ATX/M-ATX/ITX
PSU
Materials
- Steel
- 4.0mm tempered glass (both sides)
Incl Fans - 2 x 200MM 3-PIN 800 RPM ARGB fans (front)
- 1 X 120MM 3-PIN 1100 RPM Fans (rear)
Fan Support - Front: 2 x 140mm or 3 x 120mm
- Top: 2 x 120mm or 2 x 140mm
- Top of PSU chamber: 2 x 120mm
Radiator - Front: 1 x 280/360mm
- Top: 1 x 240 / 280 mm
VGA Length
CPU Clearance
Drive - Behind MB Tray: 2 x 2.5″ SSD
- Hard Drive Cage: 2 x 3.5″ HDD or 1 x 2.5″ SSD
Slot
I/O Ports - Power button
- Reset button
- LED button for lighting mode control
- 1 x HD AUDIO
- 2 x USB 3.0
Dust Filters - 1 x Top (magnetic), 1 x Bottom (tray)